The TF1 and TF2 are general purpose gage fixtures that adapt to almost any thrufeed centerless grinder. The gage fixture mounts to the exit workrest of the grinder and feeds part measurement data to a high-resolution gage controller for real-time process analysis and grinder control.
As parts exit the workblade, a carbide "V" channels them into the gaging portion of the fixture. An adjustable-height carbide gage shoe rides on top of the part as it moves through the gage area. A precision probe sends the displacement of the shoeto the D500 controller, which assembles the data into subgroups and develops real-time trend information. When the trend deviation from size increases to programmed limits, a wheel compensation signal is sent to the grinder.
| SPECIFICATIONS |
| TF1 diameter range: |
13 - 50mm
.5 - 2.0" |
| TF2 diameter range: |
44 - 75mm
1.75 - 3.0" |
| TF1, TF2 part length to: |
76mm/3.0" |
| Extended anvils for longer parts are available |
| Part tolerances down to |
.005mm/.0002" |
Click Here to View PDF Brochure
