Featured Products

MITUTOYO FALL PROMO 2017

Check out the Fall Promo 2017 from Mitutoyo on a variety of precision tools and instruments. Special promotional pricing runs from September 12 - December 22, 2017. Give us a call!




Mitutoyo Surftest SJ-210

The Surftest SJ-210 is a user-friendly surface roughness measurement instrument designed as a handheld tool that can be carried with you and used on-site.

 

Take Advantage of Our Special $2075.00 Promotional Pricing!! While Supplies Last!!




Categories

Information


TFN Precision Gage Fixture For Thrufeed Grinding
TFN Precision Gage Fixture For Thrufeed Grinding

The TFN is a high accuracy dynamic gage fixture designed to measure parts at the small end of the thrufeed grinding range. The design appears simple, but the geometry has been diligently refined to assure precise measurement of parts as they flow off the workrest blade.

Product Code: CONTROLGAGINGTFN


Tell a friend about this site or product

The TFN is a high accuracy dynamic gage fixture designed to measure parts at the small end of the thrufeed grinding range. The design appears simple, but the geometry has been diligently refined to assure precise measurement of parts as they flow off the workrest blade.

As a part enters the gage, pushed by parts behind, it slides onto a flat carbide anvil. Two side-guides on angled surfaces are adjusted inward and down to locate the part horizontally. A flat springloaded shoe floats on the partsí surface while a ruggedized probe measures the rise and fall of the shoe's upper face. The flat bottom anvil allows straightforward alignment with the surface of the machine exit guide during setup. The "floating" shoe bridges gaps or undercuts in the part up to 12mm/.5".

The TFN can be mounted to the workrest blade support or embedded in a conveyor. See the PDF page for more detail.

SPECIFICATIONS
Workrest Mount dia. range:
1.5 - 32mm (.06 - 1.3")
Conveyor Mount dia. range:
4 - 32mm (.16 - 1.3")
Length/Diameter ratio:
3:2 or longer for ODs < 19mm (.75")
2:3 or longer for ODs > 19mm (.75")
Thrufeed feedrates:
Up to 11.4m/minute (450"/minute)
Part tolerances down to .0038mm (.00015")

 

Click Here to View PDF Brochure