Featured Products

Edmunds EPIC-CAG Amplifier

Edmunds EPIC-CAG Gaging Amplifier

Edmunds Gages introduces EPIC-CAG, the newest generation of multi-dimensional computer aided gaging, featuring modular components to integrate the most complex gaging applications into the manufacturing process.




Mitutoyo Surftest SJ-210

The Surftest SJ-210 is a user-friendly surface roughness measurement instrument designed as a handheld tool that can be carried with you and used on-site.

 

Take Advantage of Our Special $2075.00 Promotional Pricing!! While Supplies Last!!




Categories

Information


TF1/TF2 Thrufeed Centerless Gages
TF1/TF2 Thrufeed Centerless Gages

The TF1 and TF2 are general purpose gage fixtures that adapt to almost any thrufeed centerless grinder. The gage fixture mounts to the exit workrest of the grinder and feeds part measurement data to a high-resolution gage controller for real-time process analysis and grinder control.

Product Code: CONTROLGAGINGTF1/TF2


Tell a friend about this site or product

The TF1 and TF2 are general purpose gage fixtures that adapt to almost any thrufeed centerless grinder. The gage fixture mounts to the exit workrest of the grinder and feeds part measurement data to a high-resolution gage controller for real-time process analysis and grinder control.

As parts exit the workblade, a carbide "V" channels them into the gaging portion of the fixture. An adjustable-height carbide gage shoe rides on top of the part as it moves through the gage area. A precision probe sends the displacement of the shoeto the D500 controller, which assembles the data into subgroups and develops real-time trend information. When the trend deviation from size increases to programmed limits, a wheel compensation signal is sent to the grinder.

SPECIFICATIONS
TF1 diameter range: 13 - 50mm
.5 - 2.0"
TF2 diameter range: 44 - 75mm
1.75 - 3.0"
TF1, TF2 part length to: 76mm/3.0"
Extended anvils for longer parts are available
Part tolerances down to .005mm/.0002"

 

Click Here to View PDF Brochure