Featured Products

Edmunds EPIC-CAG Amplifier

Edmunds EPIC-CAG Gaging Amplifier

Edmunds Gages introduces EPIC-CAG, the newest generation of multi-dimensional computer aided gaging, featuring modular components to integrate the most complex gaging applications into the manufacturing process.




Mitutoyo Surftest SJ-210

The Surftest SJ-210 is a user-friendly surface roughness measurement instrument designed as a handheld tool that can be carried with you and used on-site.

 

Take Advantage of Our Special $2075.00 Promotional Pricing!! While Supplies Last!!




Categories

Information


Starrett Chamfer Gages
Starrett Chamfer Gages

Chamfer Gages

For Internal Chamfers:
No. 683 Series
0-90°
No. 684 Series 90-127°

For External Chamfers:
No. 685 Series
0-90°
No. 686 Series 90-127°

Product Code: STARRETTCHAMFERGAGES


Tell a friend about this site or product

Chamfer Gages

These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number.

All ground surfaces are of hardened tool steel. Indicators are AGD design.

Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face of the gage.

External gages will measure the smallest diameter of any chamfer within the range of angles printed on the dial face of the gage.

Click Here to View Product Information